Search Associated Items Range
Siliconbond Caulking Compound
Technical drawings
Right click and "Save Target/Link As".
Further information
Download PDF Datasheet
Available in 2 variation(s).
Use
Caulking compound for pointing purposes where lead flashing is returned into mortar joists.Also suitable for sealing lead flashing, chase filling etc.
Introduction
Silicon based one part caulking compound based upon a neutral curing system.Specific gravity approximately 1.12. Practical elongation 25%.Skin time 30 minutes.Cure time 3 to 6 days depending on temperature. Note Preformed cavitrays with attached lead flashings are conventionally flush-pointed when being built-in and do not require siliconbond.This product is for applications where ‘pointing in ’ is normally carried out at a later date.It may be used to address the recommendations of the Lead Sheet Association. Suitable for use with our Flashing Anchoring Strip (FAS).
Data
•Clear/translucent finish harmonises with all mortar/masonry colours.
•Supplied in 310ml cartridges. (Shelf life 12 months.)
•One part cartridge applied system.
•Neutral and moisture curing.
•Absorbs thermal movement between lead and masonry