Introduction to Damp Proofing

Damp Proofing



Type FAS

Available in 1 variation(s).

Use
To secure flashing in position and ensure correct linking with conventional DPC.

Introduction
The FAS flashing anchoring and DPC integrity system is designed to overcome problems which can occur where flashings are turned into walls of brick and stone, constructed with or without a conventional DPC material. Incorporated by the bricklayer whilst raising the wall, the Type FAS provides the facility for the flashing to be correctly located and secured at a later date, whilst promoting the correct DPC/flashing relationship. The integral barbs grip the 25mm turn-in of the flashing and eliminate the need for lead wedges. When pointed with silicone sealant the joint accommodates differences in thermal movement and prevents the cracking and falling out that commonly occurs when mortar is used in restricted pointing applications.

Data

  • 2000mm x 65mm x 6/16mm.
  • Eliminates chopping out of mortar and damage of DPCs.
  • Eliminates wedging.
  • Self-secure integral barbs.