Ventilation Range
Use
Pack providing over fascia ventilation, eaves ventilation and felt support.Introduction
The three-in-one roof ventilation kit provides...
Type CLV Circular Louvered Ventilator
Use:
Louvered ventilator that can be used to ventilate an existing cavity wall.
Introduction:
The Type CLV is...
Use
To provide airflow in and out of roof space via the soffit board. Suitable for introduction into existing soffit boards to fulfil airflow requirements....
Use
Circular Soffit Ventilators with louvres, for new and existing work. Ventilators promote the entry of air into the roof space. Introduction
The...
Use
To provide air ventilation at eaves level, where a running masonry corbel is constructed. Introduction
The Type CV Corbel Ventilator...
Use
To provide ventilating infill whilst preventing entry of birds under contoured roof finishes. Introduction
The eaves comb filler is...
Use
Permits entry of air via eaves. Introduction
The eaves roll-out ventilator is manufactured in PVCU. The cross corrugations permit this...
Use
To provide ventilation within flat and low pitched roofs. Introduction
The Type ERV External Roof Ventilator is designed to permit the...
Use
Promotes airflow in and out of roof space via fascia top whilst providing eaves comb facility and eaves protection. Introduction
The...
Use
Permits entry of air into the roof space via eaves. Introduction
Preformed ventilator with flyscreen. For use between open eaves, without...
