Search Ventilation Range
Type CLV Circular Louvered Ventilator
Technical drawings
Right click and "Save Target/Link As".
Further information
Download PDF Datasheet
Type CLV Circular Louvered Ventilator
Use:
Louvered ventilator that can be used to ventilate an existing cavity wall.
Introduction:
The Type CLV is popular in after-fit drill and vent applications. It can be introduced when the wet trades have finished. It differs from most circular ventilators as it has an airflow aperture rating of 2100mm2. The installer is required to drill fewer holes around the building, as fewer ventilators are required to provide the requisite levels of ventilation.
Example: If a small circular vent has a free area of 300mm, it would require seven such ventilators to equal the free area of one Type CLV. The Type CLV is commonly installed at 1.2m centres to fulfil ventilation requirements in typical applications and is offered in a range of masonry harmonising colours: Terracotta, Black, White, Buff and Brown. Projecting location grips hold the Type CLV in place when inserted into the drilled hole.
Data:
Polypropylene
Size 79/70mm x 15mm - Requires 70mm hole
Free airflow 2100mm2
Louvers deflect driving rain and provide insect screening
Integral location grips