Associated Items

Type I In-screed Services Duct

  • 140mm x 50mm overall, providing approx. accommodation area of 104mm x 38mm.
  • Standard length 2400mm.
  • Extruded PVCU.
  • Colour white.
  • Cover plywood.
  • Keying and stabilising flanges.
Send us an enquiry about this product or give us a call for free:
01935 474769
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

The Type I in-screed services duct is designed to accomodate pipes or electrical wiring required to pass through a screeded floor. The duct is bedded on a level oversite or sub floor and the final screed is finished flush with the duct top edges.

Integral flanges to each side stabilise the duct and promote a firm hold by keying into the screed. Surface covers to accompany the duct are offered in 12mm plywood.

Use

Preformed services duct to accomodate pipes or electrical wiring within floor screeds.

Data

  • 140mm x 50mm overall, providing approx. accommodation area of 104mm x 38mm.
  • Standard length 2400mm.
  • Extruded PVCU.
  • Colour white.
  • Cover plywood.
  • Keying and stabilising flanges.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards